| Surface Preparation |
On cement-based surfaces, it is imperative that the surface is cured (i.e. saturated with water). The surface must be cleaned off of all oils and residue. The surface must be free of cracks and all other chemicals. The surface must be moistened with a brush and be prepared for the plastering application. On column and girder joints plastering net must be used as reinforcement. On brute concrete surfaces wetting the surface is essential. In high ambient temperature, highly absorbent glazed concrete surfaces should be primed with high adherence LRC Primer.
|
| Preparation Instructions |
11.0-12.0 kg. of clean and cool water (dependent on weather conditions) is mixed with 35 kg’s of powder and mixed for 3-4 minutes in slow revolution until a homogenous mixture is obtained; the mixture is set to rest for 5 minutes. Matured product is mixed one more time and is ready to use. Never mix water into the powder mix.
|
| Application |
The application temperature should be between +5 and +35 C. The prepared product is spread with a steel trowel. As needed, when the mortar is close to drying with the aid of a sponge the surface can be smoothened. In order to have a glass like smooth surface LRC Satin Plaster is recommended. After the surface cures any desired color or covering may be applied.
|
| Things to pay attention |
• LRC Plaster must be used within 2 hours from preparation.
• During application the environment must be protected from wind and direct sunlight.
• It is imperative that the surface is saturated with water.
|
| General considerations |
The above product information and explanations are based on our experience and the end result of our careful research. The diversity of the materials involved, the different construction and working conditions cannot be individually controlled or influenced by us. In non-control applications, the warranty status is limited only to the quality of the product sold. There is no guarantee for the application other than the production of the product. This technical paper invalidates the previous existing form. The quality of the work done may vary depending on your professional use of the product. If you are unsure, do a little test or get technical help.
|
| Disposal |
Empty packaging can be disposed of in collection boxes according to local-local regulations or recycling rules. After drying and hardening the used waste material, dispose of it as construction waste. It is dangerous to destroy product residues by burning.
|
| Safety Information |
Keep the products out of the reach of children. Keep the covers of the products closed. It is recommended to wear gloves and goggles during work. If the skin comes into contact with the material, it should be washed with soapy water immediately. In case of contact with eyes, seek medical advice immediately. For more detailed information, see the material safety data sheet.
|
