| Surface Preparation |
For a healthy application, the surface to be applied must be dry, solid, fully loaded, dust free.
|
| Preparation Instructions |
LRC PAINT TPE is all homogenized with a suitable mixer. If necessary, add 10-15% LRC Thinner C to the application viscosity.
|
| Application |
The mixture is applied to the prepared surface by air spray, airless spray, roller or brush. Depending on the surface condition it is applied in one or two coats. Wait at least 24 hours between coats.
|
| Things to pay attention |
• The place where LRC PAINT TPE application is made should be protected from
water until dry.
• Gas masks should be used in confined spaces and ventilated.
• Keep away from sources of open flame.
• R42 / 43: May cause sensitization by inhalation / skin contact.
• S 3/7: Keep container tightly closed in a cool place.
• S36 / 37: Wear protective gloves and goggles during work.
• S29: Do not throw into sewers.
|
| General considerations |
The above product information and explanations are based on our experience and the end result of our careful research. The diversity of the materials involved, the different construction and working conditions cannot be individually controlled or influenced by us. In non-control applications, the warranty status is limited only to the quality of the product sold. There is no guarantee for the application other than the production of the product. This technical paper invalidates the previous existing form. The quality of the work done may vary depending on your professional use of the product. If you are unsure, do a little test or get technical help.
|
| Disposal |
Empty packaging can be disposed of in collection boxes according to local-local regulations or recycling rules. After drying and hardening the used waste material, dispose of it as construction waste. It is dangerous to destroy product residues by burning.
|
| Safety Information |
Keep the products out of the reach of children. Keep the covers of the products closed. It is recommended to wear gloves and goggles during work. If the skin comes into contact with the material, it should be washed with soapy water immediately. In case of contact with eyes, seek medical advice immediately. For more detailed information, see the material safety data sheet.
|
