| Surface Preparation |
The floor, on which there will be application, should be cleaned of all loose parts, oil and other chemicals and the defects on the surface are repaired with LRC™ RM Repair Mortar. If the temperature of the surface, where the application will take place, is above 25°C, surface is moistened and saturated.
|
| Preparation Instructions |
LRC™ C2 –Grey
25 kg of powder material (Water should not be added to the powder material.) is poured into 5,5-7,00 liters (It is variable depending on the temperature.) of clean and cool mixture water and a homogeneous mixture without lumps is provided in 3-4 minutes with a suitable low speed mixer.
LRC™ C2 –White
25 kg of powder material (Water should not be added to the powder material.) is poured into 5,5-7,00 liters (It is variable depending on the temperature.) of clean and cool mixture water and a homogeneous mixture without lumps is provided in 3-4 minutes with a suitable low speed mixer.
|
| Application |
It should be mixed thoroughly before use to facilitate in spreading.
The mortar should be applied on the substrate and its thickness should be adjusted with steel notched trowel. Tooth size of trowel should be adjusted according to dimensions of tile and smoothness of application substrate.
Mortar should be applied on both application substrate and back side of tiles with below mentioned sizes.
– Interior wall applications;For granite ceramic, natural composed stone, etc.,
120 cm² for ceramic, tile, etc. ceramics larger than 900 cm²
– All exterior wall applications;
For good adhesion force should be applied by means of rubber hammer and air should be ejected.
It is recommended to use a suitable LRC™ JF Grouting in the joint.
|
| Application Properties |
• Open time : max. 30 minutes,
• Adjustability : max. 20 minutes,
• Time required for grouting: min 24 hours,
• Setting time: 8-15 days,
• Application thickness: 1 to 4 mm (one or both sides applications).
|
| Things to pay attention |
Not applicable on metal surfaces .
• Not applicable on interior and exterior floors.
• Not applicable on deformed floors.
• Not applicable on wet areas such as swimming pool.
• Max. coating area applicable to exterior wall is 120 cm² max. height is 6 m.
|
| General considerations |
The above product information and explanations are based on our experience and the end result of our careful research. The diversity of the materials involved, the different construction and working conditions cannot be individually controlled or influenced by us. In non-control applications, the warranty status is limited only to the quality of the product sold. There is no guarantee for the application other than the production of the product. This technical paper invalidates the previous existing form. The quality of the work done may vary depending on your professional use of the product. If you are unsure, do a little test or get technical help.
|
| Disposal |
Empty packaging can be disposed of in collection boxes according to local-local regulations or recycling rules. After drying and hardening the used waste material, dispose of it as construction waste. It is dangerous to destroy product residues by burning.
|
| Safety Information |
Keep the products out of the reach of children. Keep the covers of the products closed. It is recommended to wear gloves and goggles during work. If the skin comes into contact with the material, it should be washed with soapy water immediately. In case of contact with eyes, seek medical advice immediately. For more detailed information, see the material safety data sheet.
|
