| Surface Preparation |
The floor to be treated is cleaned from loose particles, oil and other chemicals, surface defects are repaired with LRC RM repair mortars. The bitumen to reduce surface adherence should be free of paint, mold oil and curing materials. Corners and edges should be insulated with LRC Joint Band. All expansion and moving joints must first be filled with an elastomeric joint filler.
|
| Preparation Instructions |
LRC PRIMER AC is applied as primer. LRC LP UV is homogenized with a suitable mixer.
|
| Application |
It is applied to the prepared surface with roller, brush or low-pressure sprayer.
Although the drying time is approximately 4 hours, in case of application of several layers, one day between the floors should be expected. Optimum layer thickness is 1mm at one time and 2-3 layers can be applied.
|
| Things to Consider |
• The surface temperature should be minimum + 5 ° C.
• Applications should be protected from rain, frost, wind, sunshine and high temperatures for the first 24 hours.
• The hardened mortar should not be reconstituted
• In cases where it is desired to withstand higher pressures, excellent results are obtained by reinforcing with vertical supports such as glass cloth, felt, mesh, isolation cloth, etc. in places with very cracks.
|
| General considerations |
The above product information and explanations are based on our experience and the end result of our careful research. The diversity of the materials involved, the different construction and working conditions cannot be individually controlled or influenced by us. In non-control applications, the warranty status is limited only to the quality of the product sold. There is no guarantee for the application other than the production of the product. This technical paper invalidates the previous existing form. The quality of the work done may vary depending on your professional use of the product. If you are unsure, do a little test or get technical help.
|
| Disposal |
Empty packaging can be disposed of in collection boxes according to local-local regulations or recycling rules. After drying and hardening the used waste material, dispose of it as construction waste. It is dangerous to destroy product residues by burning.
|
| Safety Information |
Keep the products out of the reach of children. Keep the covers of the products closed. It is recommended to wear gloves and goggles during work. If the skin comes into contact with the material, it should be washed with soapy water immediately. In case of contact with eyes, seek medical advice immediately. For more detailed information, see the material safety data sheet.
|
