| Surface Preparation |
The floor, on which there will be application, should be cleaned of all loose parts, oil and other chemicals and the defects on the surface are repaired with LRC RM Repair Mortar. All the expansion and moving joints should be filled with elastomeric joint filler first.
|
| Application |
LRC GUARD 20W is mixed thoroughly and becomes ready for use. It is applied on the prepared surface with a roller, brush or low-pressure sprayer. Application is made at least on two layers, and the surface is saturated with material. Between the layers, maximum 3 hours should be waited. In horizontal applications, extra material is removed with a dry cloth.
|
| Things to pay attention |
• It shouldn’t be applied on wet and frozen surfaces,
• It shouldn’t be applied on non-absorbent (marble, granite, vs.) and painted surfaces,
|
| General considerations |
The above product information and explanations are based on our experience and the end result of our careful research. The diversity of the materials involved, the different construction and working conditions cannot be individually controlled or influenced by us. In non-control applications, the warranty status is limited only to the quality of the product sold. There is no guarantee for the application other than the production of the product. This technical paper invalidates the previous existing form. The quality of the work done may vary depending on your professional use of the product. If you are unsure, do a little test or get technical help.
|
| Disposal |
Empty packaging can be disposed of in collection boxes according to local-local regulations or recycling rules. After drying and hardening the used waste material, dispose of it as construction waste. It is dangerous to destroy product residues by burning.
|
| Safety Information |
Keep the products out of the reach of children. Keep the covers of the products closed. It is recommended to wear gloves and goggles during work. If the skin comes into contact with the material, it should be washed with soapy water immediately. In case of contact with eyes, seek medical advice immediately. For more detailed information, see the material safety data sheet.
|