| Surface Preparation |
For a healthy application, the application surface has to be dry, strong, dust free and ready to be fully installed.
|
| Preparation Instructions |
Whole LRC POOL PAINT 20 is homogenized with a suitable mixer. If necessary to reach the viscosity of the application, LRC thinner is added to 5-15%.
|
| Application |
The mixture is applied to the surface prepared in advance with air spray, airless spray, roller or brush. One or two coats are applied depending on the state of the application surface. Wait at least three hours between coats.
|
| Things to Consider |
• Protect the treatment place of LRC POOL PAINT 20 from water until cures.
• Use respirator in confined space and try to ventilate the environment.
• R42/43: Inhalation / Skin contact may cause sensitization.
• S36/37: Use protective gloves and goggles during operation.
|
| General considerations |
The above product information and explanations are based on our experience and the end result of our careful research. The diversity of the materials involved, the different construction and working conditions cannot be individually controlled or influenced by us. In non-control applications, the warranty status is limited only to the quality of the product sold. There is no guarantee for the application other than the production of the product. This technical paper invalidates the previous existing form. The quality of the work done may vary depending on your professional use of the product. If you are unsure, do a little test or get technical help.
|
| Disposal |
Empty packaging can be disposed of in collection boxes according to local-local regulations or recycling rules. After drying and hardening the used waste material, dispose of it as construction waste. It is dangerous to destroy product residues by burning.
|
| Safety Information |
Keep the products out of the reach of children. Keep the covers of the products closed. It is recommended to wear gloves and goggles during work. If the skin comes into contact with the material, it should be washed with soapy water immediately. In case of contact with eyes, seek medical advice immediately. For more detailed information, see the material safety data sheet.
|
